AGM Pipes and Fittings

AGM Pipes and fittings solvent joint hot & cold water supply. uPvc cPVC Plumbing Material supplier in Karachi Pakistan. Contact +92-321-2248975

cpvc for hot water supply

CPVC Pipes & fittings Solvent joint hot water supply for commercial, residential and industrial installation. Quality Standards of AGM CPVC Pipes ASTM Standard F-411. Sizes 1/2″ to 2″. Temperature bears max 93°c.”

CPVC PIPES ASTM SCHEDULE SERIES


ASTM F441/F441M Sch. 40 CPVC Pressure Pipe
ASTM F441/F441M Sch. 80 CPVC Pressure Pipe | Solvent Weld

AGM’s ASTM F411 Solvent Weld CPVC Pipe product line is manufactured to meet the needs of residential, commercial, & industrial plumbing systems, and other pressure applications. With top quality raw materials and modern processing technology, our ASTM F411 pipe meets all industry standards in addition to our own rigorous quality control standards.

AGM produces ASTM F441 Solvent Weld pipe in a solid wall
AGM CPVC pipes retain its mechanical strength at higher temperatures till 93° C.

Notes:

  1. These dimensions are for estimating purposes only.
    All dimensions are in inches [Millimeter] unless otherwise specified.
  2. ASTM Pressure Rating @ 23° & 82°C and includes 2:1 safety factor.
  3. Internal diameter calculated using nominal outside diameter and minimum wall thickness.

AGM USES DURASTREAM CPVC COMPOUND CERTIFIED BY NSF INTERNATIONAL IN ORDER TO ASSURANCE OF HIGH QUALITY PRODUCTS.
USE OF PVC PIPE IN EXHAUST SYSTEMS

WARNING: Failure to follow these instructions exactly could result in serious injury, death, or property damage.

WARNING: Flue gas temperature should not exceed 93° Celsius. PVC pipe exposed to temperatures higher than 93° Celsius may melt or change shape, resulting in leakage of exhaust fumes and property damage.

WARNING CARBON MONOXIDE POISONING HAZARD: Vent pipe must be properly installed in accordance with all local and national plumbing and HVAC installation standards and codes.

AGM assumes no responsibility for equipment installed in violation of any code or regulation.

agm cpvc pipes

upvc for cold water drain sewer hvac

uPvc Pipe Fittings sizes from 1/2″ to 8″ for cold water drain and sewerage installation. Temperature bears maximum 59°c. AGM uPvc Quality Standards ASTM D-2241 SDR series and ASTM D-1785 / D-2665 Sch. 40″.

For sizes 1¼” and larger, our ASTM D1785 Schedule 40 pipe is also dual-rated to ASTM D2665 for DWV applications.

Sizes ½”, ¾” & 1” are not included in the ASTM D2665 DWV pipe standard.

CPVC AGM Solvent‘ for Pipe jointing or Pipe fitting weld. Solvent Sizes available in 118ml, 237ml, 473ml, 946ml tin Packing.”

UPVC PIPES ASTM SCHEDULE SERIES


ASTM D1785/D2665 Sch. 40 PVC Pressure/DWV Pipe
ASTM D1785 Sch. 80 PVC Pressure Pipe | Solvent Weld

AGM ASTM D1785 Solvent Weld PVC Pipe product line is manufactured to meet the needs of residential, commercial, & industrial plumbing systems, and other pressure applications. With top-quality raw materials and modern processing technology, our ASTM D1785 pipe meets all industry standards in addition to our own rigorous quality control standards.

For sizes 1¼” and larger, our ASTM D1785 Schedule 40 pipe is also dual-rated to ASTM D2665 for DWV applications. This gives the designer, installer, and end-user flexibility of one product for two distinct applications. AGM produces ASTM D1785 Solvent Weld pipe in both solid wall.

Sizes ½”, ¾” & 1” are not included in the ASTM D2665 DWV pipe standard.

agm pipes wall thickness table

Notes:

  1. These dimensions are for estimating purposes only.
    All dimensions are in inches [Millimeter] unless otherwise
    specified.
  2. ASTM Pressure Rating @ 23°C and includes 2:1 safety factor.
  3. Internal diameter calculated using nominal outside
    diameter and minimum wall thickness.
AGM Pipes Manufacturing

AGM uses SABIC UPVC raw materials IN ORDER TO ASSURANCE OF high-quality products.

AGM uses SABIC UPVC raw materials IN ORDER TO ASSURANCE OF high quality products.
USE OF PVC PIPE IN EXHAUST SYSTEMS

WARNING: Failure to follow these instructions exactly could result in serious injury, death, or property damage.

WARNING: Flue gas temperature should not exceed 60° Celsius. PVC pipe exposed to temperatures higher than 60° Celsius may melt or change shape, resulting in leakage of exhaust fumes and property damage.

WARNING CARBON MONOXIDE POISONING HAZARD: Vent pipe must be properly installed in accordance with all local and national plumbing and HVAC installation standards and codes.

AGM assumes no responsibility for equipment installed in violation of any code or regulation.

AGM Solvents for jointing

Cleaner

“PVC Cleaner must be used to clean and Rough the Surface of pipe fittings. Cleaner available in 237ml, 473ml.”

Leave a Reply

Your email address will not be published.